Removing And Replacing The Transceiver Board - Motorola Talkabout 191 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Transceiver Board

G
6881039B15
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery, SIM, and rear housing as described in the procedures
2. Using the flat end of the disassembly tool, carefully loosen the transceiver
board from the front housing.
FRONT HOUSING
Figure 14. Removing the Transceiver Board
3. Lift the transceiver board completely away from the front housing as shown
in Figure 14.
4. To replace, align the transceiver board with the front housing and gently press
into place.
Ensure the keypad is correctly positioned in the front housing relative to the


transceiver board. Verify operation of the keys after replacing the transceiver board.
5. Replace the rear housing, SIM, and battery as described in the procedures.
October 23, 2001
Disassembly
TRANSCEIVER BOARD
DISASSEMBLY TOOL
010706-o
.
24