Removing And Replacing The Microphone And Microphone Grommet - Motorola Talkabout 191 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Microphone and Microphone Grommet

G
6881039B15
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery, SIM, rear housing, and transceiver board as described in
.
the procedures
TRANSCEIVER
BOARD
Figure 18. Removing the Microphone and Microphone Grommet
2. Using the plastic tweezers, carefully pull the microphone assembly from its
socket on the transceiver board. The microphone assembly should come out of
its socket easily. See Figure 18.
3. Separate the microphone from the microphone grommet.
4. To replace, insert the microphone into the microphone grommet so the
terminals on the bottom of the microphone face outward. Ensure the
microphone is straight and pushed completely into the grommet.
October 23, 2001
Disassembly
MICROPHONE
ASSEMBLY
PLASTIC
TWEEZERS
MICROPHONE
SOCKET
MICROPHONE
GROMMET
MICROPHONE
010710-o
28