Removing And Replacing The Rtc Battery - Motorola Talkabout 191 Service Manual

Disassembly

Removing and Replacing the RTC Battery

G
25
1. Remove the battery, SIM, rear housing, and transceiver board as described in
.
the procedures
2. Use the flat end of the disassembly tool to pry the real time clock (RTC) battery
from its socket on the transceiver board. See Figure 15.
Dispose of used batteries according to the manufacturer's instructions.
TRANSCEIVER
BOARD
RTC BATTERY
Figure 15. Removing the RTC Battery
3. To replace, align the new RTC battery with its socket so its positive terminal
is facing upward, then snap the battery in place until it is completely seated
in the socket.
4. Replace the transceiver board, rear housing, SIM, and battery as described in
the procedures.
October 23, 2001
Product Family C25
DISASSEMBLY
TOOL
6881039B15
010707-o