ZyXEL Communications V300-T1 Release Note page 3

5. [SPR:070507233][ItemNo.:63] Web change to SIP advance setup page and save advance settings time too long.
6. [SPR:070508308][ItemNo.:66] Web Enable Ringback active of SIP advanced setup and choose codec to G.729
then make call ,but caller can't get ringback tone.
7. [SPR:070508309][ItemNo.:67] DUT-A call DUT-B then hold DUT-B change line 2 call DUT-C then DUT-A
and DUT-C onhook, DUT-A can't get ringing.
8. [SPR:070508312][ItemNo.:68] Auto firmware upgrade of firmware upgrade starttime and endtime and voice
confirm settings can't work.
9. [SPR:070509361][ItemNo.:69] Web go to speed dial settings page then change to region page can't find this web
page.
10. [SPR:070509363][ItemNo.:71] Sometime keyin speed dial number then apply can't save and find a error
message "From submitting, please wait.." .
11. Update DSP frequency to 100MHz, RD evaluate if possible this only effects voice quality.
Modification in V1.00(AOW.0)b4 | 4/28/2007
1. [SPR: 070131666][ItemNo.:9]Symptom: Can't change domain name from web, if the latest label is over 5
characters.
2. [SPR: 070205407][ItemNo.:44] Symptom: Phonebook don't display correct Phone Pumber and Name with
special character.
3. [SPR:][ItemNo.:58] V300-T1 can't get busy tone " when V300-T1 dial wrong phone number.
4. [SPR:][ItemNo.:59] V300 send SIP_info packet and RFC2833 packet in the same time when DTMF mode set
RFC2833.
5. [SPR:][ItemNo.:61] V300-T1 show wrong status when configure call Forward's advanced function.
6. [SPR:][ItemNo.:62] V300 can't disable Uncondition, NoAnswer, Busy, DND of advance call forward.
Modification in V1.00(AOW.0)b3 | 4/18/2007
1. [SPR: 070131673][ItemNo.:1]Symptom: [LCD menu setting ] On Headset and Speaker mode , when offhook
firstly, then press [Speaker] button to enter speaker mode. In this time hand up the phone then the LED of speaker
and Headset mode will be turn off .
2. [SPR: 070131674][ItemNo.:2]Symptom: [LCD menu setting ] V300-T1 occur hang up when it send VoIP call to
other DUT that enable DND mode.
3. [SPR: 070131675][ItemNo.:3]Symptom: [LCD menu setting ] The are two Symbol don't match ES.
4. [SPR: 070131676][ItemNo.:4]Symptom: LCD don't show warn message when input
(Symbol: !|#:;"/\?@%&.',+^=~-_()<>$* ) in SIP register server address
5. [SPR: 070131662][ItemNo.:5]Symptom: Can't upload RAS code or Romfile via LAN side with Cuteftp.
6. [SPR: 070131663][ItemNo.:6]Symptom: rom-t should be hide when user use ftp login to device with cuteftp.
7. [SPR: 070131664][ItemNo.:7]Symptom: Restore factory default via LAN side in web is failed.
8. [SPR: 070131665][ItemNo.:8]Symptom: Enter the Maintenance > Tools > Configuration page, the "Backup"
button is grey out about 8 seconds.
9. [SPR: 070131667][ItemNo.:10]Symptom: There should have error message, when the format is not support in
every text item.
10. [SPR: 070131669][ItemNo.:11]Symptom: In system status page, the CPU and Memory usage is always high.
11. [SPR: 070131670][ItemNo.:12]Symptom: Enable daylight savings, the time shows incorrectly.
12. [SPR: 070131671][ItemNo.:13]Symptom: In view log page, select SIP for display but there are some logs of
syslog or pppoe displays.
V300_ReleaseNote.doc 3/5