Advertisement
INSTALLATIONS
e
Camera Head
Camera head can be installed on the ceiling, wall etc.
using the threaded
1/4" -20 UNC screw hole of the
Tripod Attachment (Standard Accessory}.
1. Loosen the screw of camera
holding band until it is
stopped and insert to the camera head.
Holding Position
Band Fixing Screw
2. Loosen the screw of camera holding band.
Note:
Do not remove the screw from the band.
3. Adjust the tilt angle and rotation of camera head and
secure the camera with holding band.
Approx, 130°
Marker
(Red, Green, Blue}
4. Mount the tripod attachment onto the tripod or other
mounting bracket (sold separately).
1-1/4"
1/4"-20UNC
Caution:
If the optional C-mount lens size exceeds 2" (50.8
mm) in diameter, 2-3/4" (70 mm} in length and 0.66
Ibs (300 g) in weight, both the camera and lens
should be secured,
Advertisement
