Advertisement
PRECAUTIONS
Do not attempt to disassemble the camera or camera
control unit..
To prevent electric shock, do not remove screws or
cover.
There are no user-serviceable
parts inside.
Refer servicing to qualified service personnel.
Do not expose the camera or camera contro! unit to
rain or moisture, or try to operate it in wet areas.
Do take immediate action if ever the camera or camera
control unit do become wet. Turn power off and refer
servicing to qualified service personnel. Moisture can
damage the camera and camera control unit and atso
create the danger of electric shock.
Ambient Temperature range.
Do not install the camera in the place which is beyond
14°F - 104°F (—10°C - +40°C).
Do not drop anything inside the camera.
Dropping metal for example inside the camera could
permanently damage the unit.
i
Never crush or pinch the camera cable.
Do not bend
the camera
cable
into a curve
whose
radius is too small.
Never face the camera toward the sun.
Whether
the camera
is in use or not, never face it
toward the sun.
Do use caution when operating the
camera in the vicinity of spot lights or other bright lights
and light reflecting objects.
How to take care of this camera.
After turning off the Power ON/OFF
Switch, clean it
with a dry cloth.
if it is difficult to remove the dirts
or dusts, clean it up with a cloth applied the neutral
cleanser.
Use the lens cleaning tissue paper (may be
available at your local camera store) for lens cleaning.
Connect this unit to a DC 12V, CLASS 2 Power Supply
only.
After using the camera, turn off the Power ON/OFF
Switch and put the Lens cap on the camera head.
Connect
the camera
head and camera
control unit
which are packed in the same box (a pair). Otherwise
it would cause a improper operation.
Every necessary procedures with regard to install this
product should be made by qualified Service Personnel
or System Installers.
Cautions :
1, Connecting or disconnecting camera cable to/from
the camera control unit must be done after turning
OFF the Power ON/OFF Switch.
. Use either GP-CA56 or GP-CA57 camera cable only
to connect it between the camera head and camera
control unit. Do not extend the cable.
Advertisement
