Advertisement
ABCDEFGHIJKLM
NOPQRSTUYUXYZ
123456789
"Bale
4-H
AAG
+
+
SPACE
POSI
RET
END RESET
GP-KS152
-e Ă.
Fig. 24
When the position of the editing cursor is to be shifted
on the editing area, move the character cursor to the
"—" or "+" and press the Setup Mode Button (SET
UP). This function is used to move the editing position
or correct an individual character,
ABCDEFGHIJKLM
NOPQRSTUUUXY2
123956783
QO... "IRA
+-
z$
eF.
SPACE
POSI
RET
END RESET
GP-KS152
Fig. 25
When a blank space is needed, move the character
cursor to the "SPACE" position and press the Setup
Mode Button (SET UP). The blank space is inserted into
the cursor position on the editing area.
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
123456789
QO...
Bales
$e /K$
+ >
SPACE 4m
POSI RET END RESET
GP-KS152
Fig. 26
When the ail characters in the editing area are to be
erased,
move
the character cursor to the "RESET"
position and press the Setup Mode Button (SET UP).
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
123456789
QL.
SL Rael P=
+n 7r$
e?
PA
SPACE
POSI RET ENO RESET;
GP-KS152 -- ++
Fig. 27
fs
5-3,
After
completing
the
editing
of
the
Camera
Identification characters, the display position of the
Camera Identification character on the monitor screen
can be set as follows.
Move the character cursor to the "POSI" position and
press the Setup Mode Button (SET UP} to display the ID
position menu as shown Fig. 28 and the characters of
the camera ID starts blinking to identify the positioning
menu for you.
ABCDEFGHIJKLM
NOPORSTUVUXYZ".
123456789
J.. RRL eS
+4 72r$
e 2
SPACE
mb POSI: RET END RESET
GP-KS152
Fig. 28
The display position of the camera
ID on the monitor
screen can be changed anywhere on the entire screen
by using the Up Button (AGC), Down Button (AWC SET),
Left Button (WHT BAL) and Right Button (GAIN UP).
Notes:
1. The position moving of the camera ID stops at the
edges of the monitor screen.
2. The camera ID moves faster when any of the Up
Button (AGC), Down Button (AWC SET}, Left Button
(WHT BAL) and Right Button (GAIN UP) is kept
pressed for more than 0.5 seconds.
After completing
the positioning
of the camera
ID,
press the Setup Mode Button (SET UP} to return to
the Character Editing menu as shown in Fig. 23.
To return to the normal camera picture mode, move the
character cursor to the "END" position and press the
Setup Mode Button (SET UP).
To return to the Setup menu
for setting other items,
move the character cursor to the "RET" position and
press the Setup Mode Button (SET UP).
Light Control Setting (ELC)
Display the Setup menu as shown in Fig. 20.
Move the cursor to the "ELC" mode position and select
either the "ON" or "OFF" mode by using the Left Button
(WHT BAL) or Right Button (GAIN UP).
wk SET UP to
SYNC
SHUTTER
CAMERA
ID
ELC
AGC
WHITE
BAL
END
auc
(PUSH
SW)
Fig. 29
Advertisement
