Advertisement
PREPARATIONS
GP-KS 152 with GP-AD22T and Optional
C-mount Lens
Caution:
Keep the Power ON/OFF Switch of the camera in the
1. Remove the front cap of the camera head and confirm
OFF position throughout the installation.
that the surface of the optical filter of the camera head
is clean.
GP-KS 152 with GP-LM3T, GP-LM7R5TA,
l
Front Cap
GP-LM15T, GP-LM24T or GP-LP12T
1. Remove the front cap of the camera head and confirm
that the surface of the optical filter of the camera head
is clean.
Front Cap
lf the surface of the optical filter is dirty or dusts are
on it, clean it up with a blower brush which is for film
camera lenses (may be available at your local camera
store) or supplied lens cleaning tissue paper.
2. Attach
the optional
C-mount
lens
to the C-mount
adaptor GP-AD22T by rotating it clockwise.
tf the surface of the optical filter is dirty or dusts are
on it, clean it up with a blower brush which is for film
camera lenses (may be available at your local camera
store) or supplied lens cleaning tissue paper.
Si
2. Rotate the focus lock ring fully clockwise.
Mount the
Lens to the camera by rotating it clockwise slowly.
3. Rotate the focus lock ring fully clockwise,
i
,
Mount the lens and C-mount adaptor by rotating them
Pog Lock Rig
clockwise slowly.
Focus Lock Ring
Caution:
If the optional C-mount fens size exceeds 2" (50.8
mm) in diameter, 2-3/4" (70 mm) in length and 0.66
Ibs (300 g} in weight, both the camera
and
lens
should be secured.
Advertisement
