4.1.5
Boot
Setup Prompt Timeout
This is the number of seconds that the firmware will wait before initiating the original
default boot selection. A value of 0 indicates that the default boot selection is to be
initiated immediately on boot. A value of 65535(0xFFFF) indicates that firmware will
wait for user input before booting. This means the default boot selection is not auto-
matically started by the firmware.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enable/Disable the Quiet Boot option.
Boot Option #1
Sets the system boot order.
Fast Boot
Enable/Disable boot with initialization of a minimal set of devices required to launch
the active boot option. It has no effect on BBS boot options.
Load Built-in EFI Shell
Load/Unload the internal built-in EFI shell image inside the BIOS. (The built-in EFI
shell will still be loaded if no bootable device is found).
MIO-2364 User Manual
62