Page 2
No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
Page 3
Product Warranty (2 years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation.
Page 4
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This type of cable is available from Advantech. Please contact your local supplier for ordering information.
Page 5
1 x Startup Manual 1 x DeviceOn package Optional Accessories Heat spreader for MIO-5376 (P/N: 1970005615T001) Active cooler, 25W (P/N: 1970005512T001)* MIOe-PSE dual-port PSE power module, 15.4W x 2 (P/N: MIOe-PSE-DPA1) ...
UARTs. Moreover, MIO-5376 provides network expansion through M.2 E-Key and B-Key ports and it supports Wi-Fi and 5G/LTE modules. Advantech’s MIO-5376 SBCs are available in 15W or 25W configurations to meet a diverse range of power and performance requirements. The 15W version is a fanless system design optimized for reliability and ruggedness.
Page 11
Operating: 40 °C @ 95% relative humidity, non-con- Environment densing Humidity Storage: 60 °C @ 95%relative humidity, non-condens- Vibration Resistance 3.5 Grms Certification EMC CE, FCC Class B Mechanical Dimensions 146 x 102 mm (5.7” x 4”) MIO-5376 User Manual...
The MI/O compact form factor SBC is a new-generation SBC designed with a variety of mechanical improvements. This chapter includes board dimensions and assembly instructions for the standard thermal solution. Board Layout: Dimensions Figure 2.1 MIO-5376 Mechanical Diagram (Top Side) Figure 2.2 MIO-5376 Mechanical Diagram (Bottom Side) MIO-5376 User Manual...
Figure 2.6 MIO-5376 Mechanical Diagram (with Optional Heat Spreader) Quick Installation Guide This section guides the installation of the heatsink and optional cooler, which is con- tained in the white box inside the package. Please assemble it as in the following dia- gram.
Panel Voltage Selection Jumper: VDD1 Jumper Short Panel Voltage +3.3V (Default) +12V 3.1.2 AT Mode/Load BIOS Default: J1 Jumper Short Panel Functional On: AT mode* (default) Off: ATX mode On: Reserved* (default) Off: Reserved On: Load BIOS default Off: Normal* (default) MIO-5376 User Manual...
Generally, you simply need a standard cable to make most connections. 3.4.1 I2C Internal Connector: CN2 1655904020 Vendor/MPN Aces/85205-04001 Signal Pin Definition EC_I2C0_z_DAT EC_I2C0_z_CLK +V33_I2CCONN MIO-5376 User Manual...
BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU’s system status is valid.
4.1.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-5376 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the submenu for that item. You can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
Page 46
To select AMD CPU fTPM or Onboard SPI dTPM. Erase fTPM NV for factory reset When a new CPU is installed, Select “Enabled” to reset fTPM. Select “Disabled” to keep the previous fTPM record and continue the system boot. MIO-5376 User Manual...
Page 47
OS. ACPI Sleep State Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. PCIE Wake Enables or Disables PCIE to wake the system from S5. MIO-5376 User Manual...
Page 48
4.1.2.3 SATA Configuration 4.1.2.4 PCI-E Port Parameters M.2 M-Key Slot / ASPM Mode Control Select to Enable or Disable Onboard M.2 M-Key Slot. / NB Root Port ASPM Mode Control. MIO-5376 User Manual...
Page 49
Enable/Disable CPU Shutdown Temperature. Power Saving Mode Enable/Disable power saving mode. Backlight Enable Polarity Switch Backlight Enable Polarity for Native or Invert. Backlight Control Mode Switch Backlight Control to PWM or DC mode. MIO-5376 User Manual...
Page 50
Enable or Disable Case Open Detect Function. GPIO Configuration GPIO Configuration Settings. ACPI Report Method Configuration Select ACPI Reporting Method for EC Devices. Serial Port 1 Configuration Serial Port – Enable or Disable Serial Port (COM). MIO-5376 User Manual...
Page 51
Select COM Port Mode. Serial Port 2 Configuration Serial Port – Enable or Disable Serial Port (COM). – Change Settings Select optimal settings for a Super IO device. – COM Port Mode COM Port Mode Select. MIO-5376 User Manual...
Page 52
Serial Port 3 Configuration Serial Port Enable or Disable Serial Port (COM). Change Settings Select optimal settings for a Super IO device. MIO-5376 User Manual...
Page 53
Serial Port 4 Configuration Serial Port – Enable or Disable Serial Port (COM). – Change Settings Select optimal settings for a Super IO device. MIO-5376 User Manual...
Page 54
Hardware Monitor Watch Dog Timer Configuration – Watch Dog Timer Enable or Disable the Watch Dog Timer function. MIO-5376 User Manual...
Page 55
GPIO Configuration GPIO Control Enable – Choose to control GPIO by EC or user override during POST stage. – GPIO 0/1/2/3/4/5/6/7 Configure GPIO 0/1/2/3/4/5/6/7. MIO-5376 User Manual...
Page 56
ACPI Report Method for I2C Bus Select ACPI Reporting Method for EC I2C Bus. ACPI Report Method for CAN Bus – Select ACPI Reporting Method for EC CAN Bus. – ACPI Report Method for GPIO Select ACPI Reporting Method for EC GPIO. MIO-5376 User Manual...
Page 57
Physical Presence Spec Version Select to Tell the OS to support PPI Spec Version 1.2 or 1.3. Device Select TPM 1.2 will restrict support to TPM 1.2 devices. TPM 2.0 will restrict support to TPM 2.0 devices. MIO-5376 User Manual...
Page 58
4.1.2.7 S5 RTC Wake Settings Wake System from S5 Enable or disable System wake on alarm event. Select FixedTime, system will wake on the hr::min::sec specified. 4.1.2.8 Serial Port Console Redirection MIO-5376 User Manual...
Page 59
4.1.2.9 CPU Configuration PSS Support Enable/Disable the generation of ACPI_PPC, _PSS, and _PCT objects. PPC Adjustment Provide to adjust _PPC object. NX Mode Enable/Disable No-execute page protection function. SVM Mode Enable/Disable CPU Virtualization. MIO-5376 User Manual...
Page 60
Node 0 Information Node 0 Information – View information related to Node 0. 4.1.2.10 USB Configuration MIO-5376 User Manual...
Page 61
Controller. 'Auto' uses a default value: for a Root port it is 100 ms, for a Hub port the delay is taken from the Hub descriptor. 4.1.2.11 Network Stack Configuration Network Stack Enable/Disable UEFI Network Stack. MIO-5376 User Manual...
Page 62
4.1.2.12 NVMe Configuration 4.1.2.13 AMD CBS Zen Common Options Zen Common Options. MIO-5376 User Manual...
Page 63
NBIO Common Options NBIO Common Options. FCH Common Options FCH Common Options. Zen Common Options Global C-state Control – Controls IO-based C-State generation and DF C-State. MIO-5376 User Manual...
Page 64
NBIO Common Options System Configuration – The AUTO configuration will be applied in case an unsupported system con- figuration is selected. – Audio IOs Audio IO Control. MIO-5376 User Manual...
Page 65
FCH Common Options SATA Configuration Options – SATA Configuration Options. – Restore AC Power Loss Restore AC Power Loss. – Uart Configuration Options Uart Configuration Options. MIO-5376 User Manual...
Page 66
SATA Configuration Options SATA Controller Disable/Enable OnChip SATA controller. MIO-5376 User Manual...
Page 67
Restore AC Power Loss Restore AC Power Loss Select AC Loss Control Method. MIO-5376 User Manual...
4.1.3 Chipset Configuration Select the Chipset tab from the MIO-5376 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this sec- tion.
Page 70
4.1.3.1 South Bridge SB USB Configuration Options for SB USB Configuration. MIO-5376 User Manual...
Page 71
SB USB Configuration XHCI0 Port 0/1/2/3 – Enable/Disable XHCI0 Port 0/1/2/3. – XHCI1 Port 0/1 Enable/Disable XHCI1 Port 0/1. MIO-5376 User Manual...
Page 73
Color depth and data packing format for Non-EDID Support. – Dual LVDS Mode Select LVDS bus to Single bus mode or Dual bus mode. LVDS Panel Type – This item allows a user to select the LVDS panel resolution type. MIO-5376 User Manual...
Page 74
4.1.3.3 North Bridge Socket 0 Information View information related to Socket 0. Socket 0 Information MIO-5376 User Manual...
4.1.4 Security Select Security Setup from the MIO-5376 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the submenu for the following items, select the item and press <Enter>:...
Boot Option #1 Sets the system boot order. Fast Boot Enables or disables boot with initialization of a minimal set of devices required to launch the active boot option. It has no effect for BBS boot options. MIO-5376 User Manual...
This item allows you to save the changes done so far as user defaults. Restore User Defaults This item allows you to restore the user defaults to all the options. Boot Override Boot device select can override your boot priority. MIO-5376 User Manual...
Communications port (COM3) IRQ6 CANBus controller IRQ7 Available IRQ8 System CMOS / real time clock IRQ9 Microsoft ACPI-compliant system IRQ10 Communications port (COM4) IRQ11 Display controller IRQ12 Available IRQ13 Numeric data processor IRQ14 GPIO controller IRQ15 Reserved MIO-5376 User Manual...
Need help?
Do you have a question about the MIO-5376 and is the answer not in the manual?
Questions and answers