Specifications - Eiki EK-620UA Owner's Manual

Specifications

Item
Display type
Resolution
Zoom/focus
Zoom ratio
Keystone correction
Projection methods
Data compatibility
Video compatibility
H-Sync
V-Sync
Safety Certification
Operation temperature
Dimensions (W x H x D)
AC Input
Power Consumption
Laser Diode Power
Laser Diode Life
Input Terminals
Output Terminals
Control Terminals
Security
Note:
For questions regarding product specifications, please contact your local distributor.
"TI" 0.67" WUXGA DMD / "TI" 0.65" WXGA DMD, Type A, DC3
WUXGA (1920 x 1200) / WXGA (1280 x 800)
Motorized
Depend on Lens
Vertical: +/- 20 degrees, Horizontal: +/- 20 degrees
Front, Rear, Desktop/Ceiling (Rear, Front)
VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA, WUXGA, Mac
1080 i/p, 720p, 576 i/p, 480 i/p
15, 31~91.4KHz
24~30Hz, 47~120Hz
UL/cUL, FCC, CE, CB, CCC, KC/KCC, EAC
5° ~ 40°C
484 x 181 x 509 mm (without lens and elevators)
AC 100 – 240 V @ 50/60 Hz
370W (ECO brightness mode); 765W (Normal brightness mode)
35W@3A (Normal Mode)
20,000 Hours Standard @ 35W (Normal Mode)
1 x HDMI (version1.4) (with locking screw)
1 x DVI-D (only support digital signal)
1 x VGA IN (D-Sub 15pin) (Computer In)
1 x HDBaseT
1 x HDMI (version1.4) (with locking screw)
1 x VGA Out (Support VGA loops through to monitor) (Monitor Out)
1 x 3D SYNC Out
1 x RS232 (D-sub 9 pin) (PC Control)
1 x Wired in (3.5mm phone jack) (Remote In)
1 x USB type A (for WiFi dongle purpose)
1 x Mini USB (for LAN FW upgrade only) (Service)
1 x RJ45 (LAN)
1 x IR Receiver (On the Front side and Top side)
Kensington lock
Security bar
63
—
DLP Projector — Owner's Manual
Description
—
Specifications