Eiki EK-620UA Owner's Manual page 66

DLP Projector — Owner's Manual
9.
After getting into LAN, input the following:
• DHCP: Off
• IP Address: 10.10.10.10
• Subnet Mask: 255.255.255.0
• Default Gateway: 0.0.0.0
10.
Select the Apply → Yes to confirm the settings, and then wait until finished.
11.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
In the Address bar, input the IP address: 10.10.10.10.
12.
Press the Enter / ► button.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
50
— —