Error Codes; Monitoring Via The Victronconnect App; Victronconnect App Status Screen - Victron energy SmartSolar MPPT 250/70 Manual

7.2. Error codes

In case of an error, an error code will be displayed in the following ways:
• Via its LEDs.
• Via the VictronConnect app while it is connected to the solar charger.
• Via an optional MPPT control or SmartSolar Control display.
• Via an optional GX device or GlobalLink 520 and the VRM Portal.
For the meaning of blinking LED codes, see the previous chapter or the
For a full list of error codes and their meaning see the

7.3. Monitoring via the VictronConnect app

The VictronConnect app can be used to monitor the solar charger, see its historical values and if there are operational warnings
or errors.
This chapter explains the solar charger-specific VictronConnect app usage. Refer to the general
information about the VictronConnect app itself, such as: how to install the app, how to connect to the solar charger, how to
update firmware and more.
Where battery voltage is referred in this chapter, a 12V battery is assumed.
To arrive at values for 24V, 36V or 48V batteries, multiply the 12V values by a factor of 2, 3 or 4 respectively.

7.3.1. VictronConnect app status screen

The status screen displays the solar charger model name together with the live solar charger information.
VE Smart Networking
• The presence of the VE.Smart Networking symbol
and is receiving battery temperature and/or battery voltage data from the VE.Smart Network.
Solar
• The solar gauge shows the solar output in relation to the maximum output power that the solar charger can generate at the set
battery voltage and displays the dynamic real-time value of the solar array output power.
• The solar voltage measured at the solar terminals of the solar charger.
• The solar current flowing from the PV array into the solar charger.
Battery
Page 40
MPPT solar charger manual
Victron Toolkit
Error code overview chapter.
indicates that the solar charger is configured for VE.Smart Networking
app.
VictronConnect app manual
Monitoring
for