Victron energy MultiPlus 48/3000/35 Manual

2020-11-12 10:43
Victron Energy and Discover AES Batteries
The Discover AES range of Lithium Iron Phosphate batteries is compatible with Victron products in
various systems.
These instructions are intended to be used in conjunction with the product manual(s) supplied by
Discover Battery.
These instructions are current as of 2019-07-23. More recent updates to Victron device firmware or
Discover Battery, LYNK or Edge Card device firmware may alter set up instructions.
For the latest product details, installation and operation manuals, visit the Discover Battery website
https://discoverbattery.com
https://solar.discoverbattery.com/aes-lifepo4-batteries-renewable-energy/
1. Introduction
The Discover AES LiFePO4 Battery includes a Battery Management System (BMS) within each battery
pack. The BMS interfaces with the Victron GX device and can support multiple batteries connected in
parallel.
These instructions provide information about the integration of Discover AES Lithium batteries with
Victron Energy devices in a Closed Loop configuration using the AES LYNK Communication Gateway
with installed AES LYNK Edge Card for Victron. AES batteries can be use in an Energy Storage System
(ESS) for self consumption, Grid backup and Off-grid applications. These instructions apply to an off-
grid application.
NOTE: In a Victron networked system the charging variables will be managed automatically by the
Victron Energy - https://www.victronenergy.com/live/
1/11
» Solutions » Solar » Resources or use this direct link
Victron Energy and Discover AES Batteries