Monitoring; Led Indications; Operation States; Error States - Victron energy Phoenix Smart IP43 12/30 Manual

7. Monitoring

7.1. LED indications

7.1.1. Operation states

The Phoenix Smart IP43 Charger has multiple LEDs that can be referenced to determine the current charge state and other
operational information.
Refer to the LED indications in the table below:
Charge state
Charging disabled
Bulk
Absorption
Recondition
Float
Storage
Low current mode

7.1.2. Error states

If an error occurs, the red ALARM LED will illuminate, the charge state LEDs can then be referenced to determine the specific
error state.
Refer to the LED indications in the table below:
Error state
Bulk time protection
Internal Error
Charger over-voltage
Charger over-current
Low mains voltage
BMS connection lost
Page 44
Phoenix Smart IP43 Charger
LOW BULK
Off Blinking
Off Illuminated
Off Off
Off Blinking
Off Off
Off Off
Illuminated N/A
LOW BULK
Off Blinking
Off Blinking
Off Off
Off Blinking
Blinking Off
Off Off
ABS FLOAT
Off Off
Off Off
Illuminated Off
Blinking Off
Off Illuminated
Off Off
N/A N/A
ABS FLOAT
Off Off
Blinking Blinking
Blinking Off
Off Off
Off Off
Off Blink
STORAGE ALARM
Off Off
Off Off
Off Off
Off Off
Off Off
Illuminated Off
N/A N/A
STORAGE ALARM
Off Illuminated
Off Illuminated
Blinking Illuminated
Blinking Illuminated
Off Illuminated
Blink Illuminated
Monitoring