Ronix 8902K Manual
  1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Saw
  5. 8902K
  6. Manual

Ronix 8902K Manual

Brushless circular saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BRUSHLESS CIRCULAR SAW
8902
K

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8902K and is the answer not in the manual?

Questions and answers

Related Manuals for Ronix 8902K

Summary of Contents for Ronix 8902K

  • Page 1 BRUSHLESS CIRCULAR SAW 8902...

  • Page 2: Specification

    Max Cutting Depth at 50° 37mm Supplied in Hex key , Guide Rule 2pcs 4.0Ah Includes battery 1pc charger (2.0A) Ronix Model No. Product 8990 20V battery pack, 2.0Ah Li-ion battery 8991 20V battery pack, 4.0Ah Li-ion battery USABLE BATTERIES FOR 8902 Ronix Model No.

  • Page 3: Work Area Safety

    USABLE CHARGERS FOR 8902 Lock-off button for Auxiliary Handle on/off switch Battery Handle on/off switch Protective Guard Cutting blade Base movable Guard plate PART LIST GENERAL POWER TOOL SAFETY RULES - Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

  • Page 4: Electrical Safety

    presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. -Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY - Power tool plugs must match the outlet. Never modify the plug in any way.
  • Page 5 reduce personal injuries. - Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. - Remove any adjusting key or wrench before turning the power tool on.

  • Page 6: Cutting Procedures

    SERVICE - Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. - Follow instruction for lubricating and changing accessories. - Keep handles dry, clean and free from oil and grease. CORDLESS CIRCULAR SAW SAFETY WARNINGS CUTTING PROCEDURES 1) DANGER: Keep hands away from cutting area and the blade.
  • Page 7 use. Many accidents are caused by poorly maintained power tools. - Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. - Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

  • Page 8: Kickback Causes And Related Warnings

    performance and safety of operation. KICKBACK CAUSES AND RELATED WARNINGS − kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. − when the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator.

  • Page 9: Lower Guard Function

    blades produce narrow kerf causing excessive friction, blade binding and kickback. 14) Blade depth and bevel adjusting locking levers must be tight and secure before making cut. If blade adjustment shifts while cutting, it may cause binding and kickback. 15) Use extra caution when sawing into existing walls or other blind areas.
  • Page 10 and depths of cut. 19) Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a build-up of debris.
  • Page 11 DO NOT TRY TO HOLD SHORT PIECES BY HAND! 28) Before setting the tool down after completing a cut, be sure that the lower guard has closed and the blade has come to a complete stop. Indicator lamps Remaining capacity 29) Never attempt to saw with the circular saw held upside down in a Lighted vise.
  • Page 12 slows saw and increases potential for kickback. Keep blade clean by first removing it from tool, then cleaning it with gum and pitch remover, hot water or kerosene. Never use gasoline. 35) Wear a dust mask and hearing protection when use the tool. SAVE THESE INSTRUCTIONS WARNING! DO NOT let comfort or familiarity with product (gained from repeated...
  • Page 13 It will also void the RONIX warranty for the RONIX tool and charger. Tips for maintaining maximum battery life 1) Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power.

  • Page 14: Functional Description

    FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and thebattery cartridge is removed before adjusting orchecking function on the tool.Installing or removing battery cartridge. CAUTION: Indicator lamps Remaining Always switch off the tool before installing orremoving of the battery cartridge. capacity Lighted Hold the tool and the battery cartridge firmly when installing or removing...
  • Page 15 NOTE: When the battery cartridge is not removed easily, push it from the opposite side of the button and slide it. INDICATING THE REMAINING BATTERY CAPACITY Press the check button on the battery cartridge to indicate the remaining Remaining battery capacity. The indicator lamps light up for a few seconds. capacity % to 100%...
  • Page 16 To prevent the switch trigger from being accidentallypulled, a lock-off lever is provided. To start the tool,press the lock-off lever and pull the switch trigger.Release the switch trigger to stop. WARNING! For your safety, this tool is equipped with lock-off lever which prevents the tool from unintended starting.
  • Page 17 Indicator lamps Remaining capacity For straight cuts, align the 0° position on the front of the base with your ighted cutting line. For 45° bevel cuts, align the 45° position with it. The position % to 100% of the top guide is adjustable. 35% to 75% 5% to 35% CAUTION:...
  • Page 18 Indicator lamps Remaining Be sure the blade is installed with teeth pointing up at the front of the capacity tool. Use only the RONIX wrench to install or remove the blade. % to 100% 35% to 75% 5% to 35% To remove the blade, press the shaft lock so that the blade cannot revolve and use the wrench to loosen the hex bolt clockwise.
  • Page 19 Mount the inner flange with its recessed side facing outward onto the mounting shaft and then place saw blade, outer flange and hex bolt. BE SURE TO TIGHTEN THE HEX BOLT COUNTERCLOCKWISE SECURELY. CAUTION: Be sure to move the tool forward in a straight line gently. Forcing or twisting the tool will result in overheating the motor and dangerous kickback, possibly causing severe injury.

  • Page 20: Maintenance

    line, do not attempt to turn or force the tool back to the cut line. Doing so may bind the blade and lead to dangerous kickback and possible serious injury. Release switch, wait for blade to stop and then withdraw tool.
  • Page 21 0° angle. To maintain product SAFETY and R LIABILITY, repairs, any other maintenance or adjustment should be performed by RONIX Authorized or Factory Service Centers, always using RONIX replacement parts. BRUSHLESS CIRCULAR SAW...

  • Page 22: Optional Accessories

    CAUTION: These accessories or attachments are recommended for use with your RONIX tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

Table of Contents