Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 5002
Summary of Contents for Ronix 5002
- Page 1 SLIDING MITER SAW 300 MM 5002...
-
Page 2: Specification
Blade Size 300×30×96 TCG Cutting Capacity 95×355mm Miter Range Left 52° to right 60 Bevel Range -48° to +48° Weight 26kg Supplied in Ronix Color box Fence extension, Saw blade spacer, Includes Clamping attachment, Hex wrench, 1 Blade,Dust bag USER MANUAL... -
Page 3: Part List
PART LIST 1. Handle, Insulated Gripping Surface 2. Power Switch 3. Safty Latch 4. Upper Guard 5. Saw Blade 6. Lower Guard 7. Main Fence 8. Turntable 9. Base 10. Dust Bag 11. Turntable Lock Handle 12. Balancing Foot SLIDING MITER SAW... -
Page 4: General Safety Rules
13. Extension Bar 14. Upper Handle 15. Clamper 16. Movable Fence 17. Extension Base 18. Bevel Locking Lever WARNING! If any part is missing or damaged, do not plug in the mitre saw until you have replaced the missing or damaged parts. GENERAL SAFETY RULES WARNING! When using electric tools basic safety precautions should always be... - Page 5 use circular saws to cut tree limbs or logs. 8) Dress properly. Do not wear loose clothing or jewellery, they can be caught in moving parts. Nonskid footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. 9) Use protective equipment.
-
Page 6: Additional Safety Rules For Mitre Saws
its intended function. Check the alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service centre unless otherwise indicated in this instruction manual. - Page 7 blades that are recommended by the manufacturer. Do not use HSS (High Speed Steel) blades or any other blade that does not conform to EN847 1. Damaged, warped or deformed blades should not be used. 3) Do not use the saw without the guards in position, in good working order and properly maintained.
- Page 8 - Ensure that the machine is always fixed to a bench, whenever possible. 11) Make sure there is adequate lighting provision for your work area. 12) The laser fitted onto this mitre saw is only designed for this saw. The fitting of any external, additional or different type of laser is not permitted.
-
Page 9: Environmental Protection
Disposal of discarded material shall be in accordance with local environmental regulations. NOTE: To maintain product safety and reliability repairs, any other maintenance or adjustment should be performed by Ronix Service Authorized Service Centers, always using RONIX replacement parts. SLIDING MITER SAW...