Ronix 4311 Manual
  1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Saw
  5. 4311
  6. Manual

Ronix 4311 Manual

Circular saw 185mm
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CIRCULAR SAW 185MM
4311

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4311 and is the answer not in the manual?

Questions and answers

Related Manuals for Ronix 4311

Summary of Contents for Ronix 4311

  • Page 1 CIRCULAR SAW 185MM 4311...

  • Page 2: Specification

    SPECIFICATION Model 4311 Rated Voltage 220V Rated Frequency 50/60Hz Power 1500W No Load Speed 4800RPM Max. Blade Diamete 185mm Max. Cutting Capacity 67mm NET WEIGHT 4.2KGS Ruler : 1pc Spaner: 1pc Accessories Circular saw blade 180x1.6x2.4x40T: 1pc Carbon brush: 1pair...

  • Page 3: General Power Tool Safety Rules

    GENERAL POWER TOOL SAFETY RULES - Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. - Save all warnings and instructions for future reference. - The term «power tool» in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 4: Personal Safety

    reduces the risk of electric shock. PERSONAL SAFETY - Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under. the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

  • Page 5: Circular Saw Safety Warnings

    must be repaired. - Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. - Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

  • Page 6: Switch On/Off

    power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 5) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 6) Use the power tool, accessories and tool bits etc.

  • Page 7: Cutting Depth Adjustment

    Lock Button On/Off Switch CUTTING DEPTH ADJUSTMENT Turn the locking screw counterclockwise to loosen it. Then, with the help of a base plate, adjust the appropriate depth of the cut, and finally, turn the locking screw clockwise until it is completely tight. CUTTING ANGLE ADJUSTMENT Turn the locking screw counterclockwise to loosen it.
  • Page 8 CUTTING PATH INDICATOR For straight and consecutive cuts at a 0-degree angle, move along the zero index on the floor. For straight and continuous cuts at a 45-degree angle, move along the index 45 on the floor. INSTALLING AND REPLACEMENT OF THE CUTTING BLADE WARNING! When performing the following steps, make sure the plug is not plugged in.

  • Page 9: Maintenance

    -Never use gasoline, benzene, thinner, alcohol or the like. Discoloration, deformation or cracks may result. NOTE: To maintain product safety and reliability repairs, any other maintenance or adjustment should be performed by Ronix Service Authorized Service Centers, always using RONIX replacement parts. CIRCULAR SAW...

Table of Contents