FLASHFORGE 3D PRINTER Adventurer 3 Pro 2 User Manual page 7

Terms
Build Plate The surface on which the Adventurer 3 Pro 2 builds an object
The black tape that covers Adventurer 3 Pro 2's build plate so
Build Tape
that object can stick to the build plate well
The three dimensional amount of space that an object
Build Volume
will use once it is completed. The largest build volume
is 150*150*150mm.
This integral extruder device installed on X-Axis. Extruder
Extruder draws the filament from the spool, melts it and pushes it
though a nozzle into the build plate.
Also called 'print head', which located at the bottom
Nozzle
of the extruder where heated filament is squeezed out.
Cooling Fan To cool the outer assembly of the extruder and gear motor
A specific box for placing Flashforge filament, which is
Filament Cartridge
located on the right of printer.
A white plastic tube that guides the filament from the
Filament Guide Tube
filament box to the filament intake
An opening located an the top of the extruder
Filament Intake
A solid adhesive used for making the model stick to the
Solid Glue Stick
build plate firmly
05