Table of Contents
Advertisement
Notices
a. If Polar cloud is in an intranet [that is, the printer and PC connect to the same router],
the video is shown, and the state of printing can be displayed in real time. If Polar cloud
is in an extra-net, the pictures are shown [in case of printing, a picture is sent per 20s;
in case of not working, a picture is sent per 60s].
b. When the camera is turned on or off, the lower computer will turn off and reconnect
Polar cloud, so Polar cloud will not respond for a while. The recovery time depends on
the state of network.
2.5.4 Error Handling
PolarCloud
Account:
Error
PIN:
Confirm
Save
If the lower computer does not connect to Polar cloud
and the printer has is deleted from the Cloud, the error
is reported; at this point, the factory settings can be
restored in order to solve the problem. After the lower
computer connects to the printer and the printer is
deleted from the Cloud, the sign-up needs to be done
again according to the foresaid steps.
45
Advertisement
Table of Contents
Need help?
Do you have a question about the Adventurer 3 Pro 2 and is the answer not in the manual?
Questions and answers