FLASHFORGE 3D PRINTER Adventurer 3 Pro 2 User Manual page 28

5. When the printer is connected successfully, the [Multi-Machine Control] interface will pop
up where you can view the printer connection status. In this case, it will display the printer
as a connected status.After processing the model in FlashPrint software, click the top print
icon. Click [Start Slicing]-[Slice]. Select the appropriate location to save the slice processed
files.
Notices
When the user wants to use the browser to view the images, the printer and PC must be in
an intranet [that is, the printer and PC connect to the same router].
4. In the pop up dialog box, the connection
mode selects Automatic Scan or fill in the
IP port column with the IP address of the
printer. Query IP address clicking [Tools] -
[About], turn to next page, you can see
the IP address. Input completion and
click connect.
26