Model File Transfer - FLASHFORGE 3D PRINTER Adventurer 3 Pro 2 User Manual

2.4.2 Model File Transfer

After generating the Gcode file, you can transfer it to your printer with different network
methods. If use USB stick to print, please insert your USB stick with target .g/.gx file to
your printer, there will be no need to set new network.
Method 1:
Wi-Fi Connection
Network
Setting
1. Tap [Tools] - Tap [Network] - Tap [Wi-Fi].
WiFi
Choose a network
Flashforge
ChinaNet-AnCr
TP-LINK_EDC2
QS_1234
1/3
2. Choose a network and input the password.
3. Open the FlashPrint software, click the icon at the bottom left corner of the interface to
select the [Machine Type]., select [Flashforge Adventurer 3 series]. Then click [Print] -
[Connect Machine].
Preheat
About
123
Wi-Fi Hot spot
Cloud Ethernet
abc
25
WiFi
Flashforge
%#
Choose a network
ChinaNet-AnCr
TP-LINK_EDC2
QS_1234
1/3