ziva EasyVac Manual page 20

Do not vacuum too quickly!
Wait at least 40 seconds between vacuuming bags to prevent overheating and
damage to the device.
Making a vacuum bag from vacuum foil on a roll
You can use vacuum foil on a roll to make a (much longer) vacuum bag.
Prevent leakage with a double seal
After the vacuum cycle, pull the bag slightly back from the machine and press Seal
again (make sure the bag is still under the seal strip) for a more secure double seal.
You proceed as follows:
1. Cut the foil to the desired length.
2. Place this with one end at least 10 mm (1 cm) over the seal rubber (part, page 5)
3. Close the lid by pressing it firmly until you hear it click.
4. Press the "Seal" button and wait for the process to complete.
5. You can now open the lid and use the vacuum bag as such.
Need vacuum bags or foil?
Copyright © 2024 – Kenners bv, Nieuwveen, The Netherlands
Order vacuum bags and foil, which are
optimized for this machine and sous-vide,
directly by scanning this secure QR code.
19