Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Setup Manual
Touch Panel Color LCD Monitor
Important
Please read this "Setup Manual", and "User's Manual" (separate
volume) carefully to familiarize yourself with safe and effective usage.
Please retain this manual for future reference.
• For monitor adjustment and settings, refer to the "User's Manual".
• For the latest product information including the "Setup Manual",
refer to our web site :
http://www.eizoglobal.com
Advertisement
Table of Contents
Related Manuals for Eizo MDF4601WT
Summary of Contents for Eizo MDF4601WT
-
Page 1: Setup Manual
Setup Manual Touch Panel Color LCD Monitor Important Please read this “Setup Manual”, and “User’s Manual” (separate volume) carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference. • For monitor adjustment and settings, refer to the “User’s Manual”. •... -
Page 2: Safety Symbols
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice. -
Page 3: Precautions
WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your local EIZO representative for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. - Page 4 WARNING Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/ spills into the cabinet, block the power supply immediately.
- Page 5 WARNING Use the correct voltage. • The unit is designed for use with a specific voltage only. Connection to polarities and voltages other than those specified on the monitor or in this User’s Manual may cause fire, electric shock, or equipment damage. •...
- Page 6 WARNING Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor.
-
Page 7: Table Of Contents
CONTENTS PRECAUTIONS ............3 CONTENTS ............. 7 Chapter 1 Introduction ........8 1-1. Package Contents ......... 8 1-2. Controls and Functions ....... 8 ● Front view / Rear view ........8 ● Side view ............9 Chapter 2 Installation / Connection ....11 2-1. -
Page 8: Chapter 1 Introduction
Check that all the following items are included in the packaging box. If any items are missing, contact your local EIZO representative. • Monitor main unit • Setup Manual (this manual) • EIZO LCD Utility Disk (CD-ROM) • Stylus (touch pen) - DMT-DD, Touch Panel Driver • AAA alkaline battery for stylus (x 1) - TPOffset, software used to adjust the sensitivity •... -
Page 9: Side View
● Side view 5. Handle Handles for transportation Enables or disables touch panel operation. button The button lights up blue when touch panel operation is enabled. Note • Two buttons are provided. You can use either one of them according to the installation position of the monitor. - Page 10 13. USB upstream port Connect a USB cable to this port to: • Use the touch panel, • control the monitor via USB, or • use USB hub function. 14. VGA (D-Sub) connector Inputs analog signal of a PC. 15. DVI-2 / RGB-2 (DVI-I) connector Inputs DVI signal (digital, analog) of a PC. 16.
-
Page 11: Chapter 2 Installation / Connection
Chapter 2 Installation / Connection 2-1. Installation This product can be installed horizontally or vertically. (Allowable angle: 0° to 90°) ● Installation examples Installation example 1: Horizontal Installation example 2: Vertical Attention • When installing the monitor vertically, place it so that the cable connectors are located on the lower side. Note •... -
Page 12: Installation Condition
● Installation condition Rear view Unit: mm 1. Cooling fan 1. Cooling fan 2. Operation 2. Operation 7. Ground contact area 3. Air intake area 6. Mounting tapped hole 4. Connector 5. Buzzer Name Installation condition 1. Cooling fan • Do not block the area around the cooling fans. Ensure there is sufficient space around the cooling fans so that air can circulate. - Page 13 ● Securing the Air Flow Create a ventilation slot as shown in the following figure in order to secure the air flow. Air intake area side Ensure that no objects are placed within 60 mm of the ventilation slot. Dimensions Unit: mm 1336 Ventilation slot...
-
Page 14: Checking Strength Of The Installation Location
● Checking strength of the installation location The weight of this product is approximately 47.2 kg. Check the withstand loads of the installation location and fittings used. ● Securing the installation environment • When mounting the monitor on a wall, pay attention to lighting equipment, sprinklers, and sensors on the ceiling. -
Page 15: Outline Dimensions
● Outline Dimensions Unit: mm 1336 (157.5) (157.5) 1021 Display area Mounting holes M8 Depth 15 mm Thread pitch 1.25 mm (10 holes) Chapter 2 Installation / Connection... -
Page 16: Connection
2-2. Connection Attention • Confirm the operation and performance of the cables before using them. • Check the shapes of the connectors, and connect the cables. • After a connector with a securing screw is plugged in, tighten the screw of the connector to secure the coupling. Connect a signal cable. - Page 17 ● Connecting video equipment Video equipment CVBS CVBS BNC Cable Connect a USB cable. This is required for controlling the touch panel, or for controlling the monitor from the system. USB cable Connect a communication cable. Prepare and connect a cable required for controlling the monitor.
- Page 18 To control the control buttons from outside, connect the control cable to the OSD port. For details on the control, contact your local EIZO representative. Connect the monitor to a power supply. There are two options for connecting the monitor to a power supply. Carry out the connection according to the installation environment and conditions of use.
- Page 19 3. Install the terminal block. Install the terminal block to the monitor main unit, and tighten the left and right clamp screws using a flat- head screwdriver with tip width of 2.5 mm (recommended torque: 0.2 N·m to 0.3 N·m). Terminal block Terminal block Flat-head...
-
Page 20: Displaying The Screen
2-3. Displaying the Screen When using the AC power supply, make sure the AC main power switch is turned ON. (It is set to ON by factory default.) lights up green when the switch is ON. Press to turn on the monitor. The monitor operation buttons light up green. - Page 21 If an image does not appear, switch the input signal. Procedure 1. Press The connector name of the currently displayed signal appears at the bottom right of the screen. 2. Press to switch signals. 3. Press to apply the change. DVI-1 DVI-2 RGB-2...
-
Page 22: Turning Power Off
2-4. Turning Power Off Hold down the button for five seconds or more. The progress bar is shown on the screen, then the power is turned off. Control buttons other than go off. Attention • To completely shut off the power, disconnect the AC power cord and the DC electrical wires. Chapter 2 Installation / Connection... -
Page 23: Chapter 3 Touch Panel Settings
Make sure the USB cable has been connected between the monitor and PC (see page 17). Setting up the sensitivity Execute the "TPOffset" application on the "EIZO LCD Utility Disk" (CD-ROM), and adjust the sensitivity of the touch panel. For details, refer to the TPOffset User’s Manual (on the CD-ROM). - Page 24 Windows 8.1 1. Click at the bottom of the "Start" screen. 2. The "Apps" screen appears. 3. Click "Control Panel" under "Windows System". Windows 7 Click "Start" - "Control Panel". 2. Click "Hardware and Sound" - "Tablet PC Settings" (Windows 10 / Windows 8.1) / "Tablet PC Settings"...
- Page 25 8. After completing calibration, click "Yes" to save the calibration data. 9. Click "OK" to close the window. Setting the operation method 1. Open the Windows Control Panel. The method for opening the Control Panel differs depending on the OS (see page 23). 2.
-
Page 26: Using Dmt-Dd
3-3. Using DMT-DD When using the touch panel driver supplied by EIZO (DMT-DD), set up the driver according to the following procedure. Connecting a USB cable Make sure the USB cable has been connected between the monitor and PC (see page 17). -
Page 27: How To Use The Stylus (Touch Pen)
3-5. How to Use the Stylus (Touch Pen) Configure the touch panel settings before using the stylus (see “Chapter 3 Touch Panel Settings” (page 23)). ● Turning the power on 1. Insert an AAA battery into the stylus and close the cap tightly. 2. -
Page 28: Checking Operation
● Checking operation 1. Launch the Windows Paint application. 2. Hold the stylus vertically to the touch panel, and draw a line from left to right. 3. Make sure the line is visible. If the line is not visible, check whether the power is turned on. Attention •... -
Page 29: About The Stylus Holder
● About the stylus holder You can attach the holder used for placing the stylus to the monitor. The magnet on the bottom of the holder enables it to be attached to a monitor position as shown in the figure. For vertical placement For horizontal placement Front face... -
Page 30: Chapter 4 Troubleshooting
Chapter 4 Troubleshooting 4-1. No Picture Problem Possible cause and remedy 1. No picture • Check whether the power cord is connected properly. • None of the operation buttons light up. • Turn the main power switch on. • Turn off the main power, and then turn it on again a few minutes later. -
Page 31: Touch Panel Problems
4-2. Touch Panel Problems Problem Possible cause and remedy 1. Touch operation is disabled. • Touch panel operation may be disabled. Press the button to enable the operation. The button lights up blue. • Check that the monitor and PC are connected with a USB cable. •... - Page 32 Problem Possible cause and remedy 4. Cursor is jittery. / Drawing lines • Check that the power cord of the monitor and PC is connected to a are not straight and smooth. grounded main outlet. Failure to ground the equipment may result in a malfunction.
-
Page 33: Appendix
Appendix ● Compatible resolutions / signal formats The monitor supports the following resolutions and signal formats. • For PC inputs (DVI-1, DVI-2/RGB-2, VGA) Vertical scan frequency Resolution DVI-1, DVI-2/RGB-2 640 × 480 60 Hz ~ 75 Hz 720 × 400 70 Hz 70 Hz 800 ×... -
Page 34: Usb Port
RS232C port (D-Sub 9-pin (female)) Connector Pin configuration Pin No. Signal Pin No. Signal TXD (output) RXD (input) Ground RS485 port Connector 1 2 3 4 5 6 7 8 Manufacturer Monitor Connector Model Terminal Block Model PHOENIX CONTACT CC 2.5/8-GF-5.08 FKCN 2.5/8-STF-5.08 Pin configuration Pin No. - Page 35 Ethernet port (RJ-45) Connector Pin configuration Pin No. Signal Pin No. Signal OSD port Connector 1 2 3 4 5 6 Manufacturer Monitor Connector Model Terminal Block Model PHOENIX CONTACT CC 2.5/6-GF-5.08 FKCN 2.5/6-STF-5.08 Pin configuration Pin No. Signal Pin No. Signal Key 1 (+ / up) Key 4 (Select)
- Page 36 DVI-1 (DVI-D) connector Connector Pin configuration Pin No. Signal Pin No. Signal T.M.D.S. Data 2- Hot Plug Detect T.M.D.S. Data 2+ T.M.D.S. Data0- T.M.D.S. Data2/4 Shield T.M.D.S. Data0+ T.M.D.S. Data0/5 Shield DDC Clock (SCL) DDC Data (SDA) T.M.D.S. Clock shield T.M.D.S.
- Page 37 VGA connector (D-Sub mini 15-pin) Connector 8 7 6 Pin configuration Pin No. Signal Pin No. Signal Red Video Green Video Ground Blue Video Ground Ground Data (SDA) H.Sync Red Video Ground V.Sync Green Video Ground Clock (SCL) Blue Video Ground CVBS connector (BNC) Connector Pin configuration...
-
Page 38: How To Replace The Dc Power Fuse
How to replace the DC power fuse Attention • Be sure to follow the procedure when replacing the fuse. Note that EIZO Corporation assumes no responsibility for any damage caused due to incorrect handling of this product. • Always use the following fuse. -
Page 39: How To Replace The Cooling Fan
● How to replace the cooling fan Attention • Be sure to follow the procedure when replacing the fan. Note that EIZO Corporation assumes no responsibility for any damage caused due to incorrect handling of this product. Note • Please contact your local EIZO representative for replacement parts. - Page 40 Remove the fan from the fan holder. Screw M3 x 20 (four pcs) Label surface Tapped holes (four holes) Fan holder 1. Remove the screws (four pcs) that secure the fan. Use a Phillips screwdriver to remove the screws. 2. Remove the fan. Install a new fan in the fan holder.
-
Page 41: Periodical Check Of Buzzer Alarm
• The buzzer installed in this monitor can be activated to emit warning beeps by using monitor control communication. • Periodically check to ensure that the buzzer warning beeps work. Use monitor control communication to check the buzzer. Note • For details on monitor control communication, contact your local EIZO representative. Appendix... - Page 42 Helmut-Grashoff-Strasse 18, 41179 Mönchengladbach, Germany 〒 924-8566 石川県白山市下柏野町 153 番地 中国苏州市苏州工业园区展业路 8 号中新科技工业坊 5B 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan http://www.eizo.co.jp 00N0N023A1 http://www.eizoglobal.com SUM-MDF4601WT-2-AL Copyright © 2017 EIZO Corporation. All rights reserved. 1st Edition-September, 2017 Printed in Japan.