Table of Contents
Advertisement
Hardware
3.2 Power Requirements
The default power configuration for the EVM requires a power supply capable of supplying 5 V (1 A) via banana
jacks for the device power (AVDD and IOVDD) and 3.3 V (1A) via test clips for VREF. Also needed is 5 V (4A)
via J12 power jack on the TSW1400EVM.
6
ADC36xxEVMCVAL Evaluation Module
Figure 3-3. LVDS Interposer Card
Figure 3-4. TSW1400EVM Configuration
Copyright © 2023 Texas Instruments Incorporated
www.ti.com
SBAU446 – DECEMBER 2023
Submit Document Feedback
Advertisement
Table of Contents
