Table Of Contents - Net to Net Technologies TIM1500 User Manual

Contents
1.0 INSTALLATION
1.1 Unpack and Inspect the TIM1500
1.2 Verify TIM1500 Switch Settings
1.2.1 Switch 2
1.2.2 Switch 3
1.3 Install the TIM1500 in an IP DSLAM Chassis
1.3.1 Align the TIM1500 with the IP DSLAM Slot Module Guides
1.3.2 Slide the TIM1500 Firmly into the Chassis
1.3.3 Verify that the TIM1500 is Receiving Power
1.3.4 Secure the TIM1500 in the IP DSLAM Chassis
1.4 Connect the T1 Line(s)
1.4.1 Local Connection
1.4.2 Remote Connection
1.4.3 Verify the Connection
1.5 LED Indications
2.0 T1 PARAMETERS
2.1 Parameter Defaults
2.2 Transmit (Tx) Buildout
2.2.1 0 dB (default)
2.2.2 -7.5 dB, -15 dB, -22.5 dB
2.3 Clock Source
2.3.1 Local (default-provider mode)
2.3.2 Loop (default-subscriber mode)
2.4 Frame Type
2.4.1 Extended Super Frame (default)
2.4.2 Super Frame
2.5 Line Code
2.5.1 Bipolar with 8 Zero Substitution (default)
2.5.2 Alternate Mark Inversion
2.6 Speed
3.0 ADDITIONAL INFORMATION
3.1 Configuration and Management
3.2 Data Storage
3.3 Regulatory Compliance
210-0000053 rev02
1.4.1.1 Select the Appropriate RJ21 Connector(s)
1.4.1.2 Detach the Velcro Strap and Position the T1 Cable RJ21 Connector(s)
1.4.1.3 Secure the Connector(s)
1.4.1.4 RJ21 Port Pinouts
1.4.2.1 Loop Bonded Connection
1.4.2.2 Single Line T1 Connection
TIM1500 User Guide Page 2 of 21