Table of Contents
Advertisement
5. INSTALL REAR FLOOR CENTER CROSSMEMBER (See page BP-52)
6. INSTALL BODY LOWER BACK PANEL (See page BP-49)
7. APPLYING SEALER TO THE INSIDE OF THE VEHICLE (See page PC-1)
8. APPLYING SEALER TO THE REAR LUGGAGE COMPARTMENT (See page PC-1)
9. APPLYING UNDER COATING (See page PC-5)
10. REPLACEMENT SILENCER SHEET (See page PC-8)
11.
APPLYING ANTI-RUST AGENT
(a) After applying the top coat layer, apply the anti-rust agent to the inside of the necked section structural
weld spots.
BODY PANEL REPLACEMENT
BP-57
Advertisement
Table of Contents
