Table of Contents
Advertisement
SS-12
INTRODUCTION
4. ANTI-RUST TREATMENT
(a) BODY SEALER APPLICATION
(1) For water-proofing and anti-corrosion measures, al-
ways apply the body sealer to the body panel seams
and hems of the doors, hoods, etc.
F10021A
(b) UNDERCOAT APPLICATION
(1) To prevent corrosion and protect the body from dam-
age by flying stones, always apply sufficient undercoat
to the bottom surface of the under body and inside of
the wheel housings.
F10022
5. ANTI-RUST TREATMENT AFTER PAINTING
PROCESS
(a) ANTI-RUST AGENT (WAX) APPLICATION
(2) To preserve impossible to paint areas from corrosion,
always apply sufficient anti-rust agent (wax) to the in-
side of the hemming areas of the doors and hoods, and
around the hinges, or the welded surfaces inside the
boxed cross-section structure of the side member,
body pillar, etc.
F10023
Advertisement
Table of Contents
