BP-18
4.
MEASURING THE ENGINE COMPARTMENT DIMENSIONS (See page BP-72)
5.
INSTALL COWL TOP SIDE PANEL (See page BP-14)
6.
APPLYING SEALER TO THE ENGINE COMPARTMENT (See page PC-1)
7.
APPLYING SEALER TO THE INSIDE OF THE VEHICLE (See page PC-1)
8.
APPLYING UNDER COATING (See page PC-5)
9.
APPLYING ANTI-RUST AGENT
(a) After applying the top coat layer, apply the anti-rust agent to the inside of the necked section structural
weld spots.
BODY PANEL REPLACEMENT