Table of Contents
Advertisement
BP-26
7. MEASURING THE ENGINE COMPARTMENT DIMENSIONS (See page BP-72)
8. MEASURING THE UNDER BODY DIMENSIONS (See page BP-72)
9. INSTALL FRONT FENDER APRON (See page BP-16)
10. INSTALL COWL TOP SIDE PANEL (See page BP-14)
11.
INSTALL FRONT CROSSMEMBER (See page PB-6)
12. INSTALL RADIATOR SUPPORT (See page BP-1)
13. APPLYING SEALER TO THE ENGINE COMPARTMENT (See page PC-1)
14. APPLYING SEALER TO THE INSIDE OF THE VEHICLE (See page PC-1)
15. APPLYING UNDER COATING (See page PC-5)
16. REPLACENT SILENCER SHEET (See page PC-8)
17. APPLYING ANTI-RUST AGENT
(a) After applying the top coat layer, apply the anti-rust agent to the inside of the necked section structural
weld spots.
BODY PANEL REPLACEMENT
Advertisement
Table of Contents
