2.
INSTALL QUARTER PANEL
HINT:
Inspect the fitting of the front door, back door and rear combination light, etc., before welding, since this
affects the appearance of the finish.
(a) Before temporarily installing the new parts, apply body sealer to the wheel arch.
HINT:
D Apply body sealer about 5 mm (0.20 in.) from the flange, avoiding any oozing.
D Apply sealer evenly, about 3 - 4 mm (0.12 - 0.16 in.) in diameter.
D For other sealing points, refer to section PC.
(b) Use waterproof rivets for the fuel filler opening lid installation.
BODY PANEL REPLACEMENT
BP-39
F10329A