BP-30
4. MEASURING THE OPENING PORTION DIMENSIONS (See page BP-72)
5. INSTALL COWL TOP SIDE PANEL (See page BP-14)
6. APPLYING SEALER TO THE ENGINE COMPARTMENT (See page PC-1)
7. APPLYING SEALER TO THE INSIDE OF THE VEHICLE (See page PC-1)
8. APPLYING UNDER COATING (See page PC-5)
9. CHARGING THE POLYURETHANE FOAM (See page PC-7)
10. APPLYING ANTI-RUST AGENT
(a) After applying the top coat layer, apply the anti-rust agent to the inside of the necked section structural
weld spots.
BODY PANEL REPLACEMENT
F10324A