Vertex Standard LTR VX-2200 Service Manual page 19

Hide thumbs Also See for LTR VX-2200:

Table of Contents

7. Tight Noise SQL RSSI

Note: The "RX VCO Tune Voltage", "PLL Reference Frequency", and "RX Sensitivity (RX Tune)" must be done before

this alignment is started.

Set the transceiver to CH1 (band center, wide devia-

tion) via the "Channel" box on the "Alignment" win-

dow.

Tune the RF output of the Radio Tester to 481.100 MHz,

then set the output level to +3 dBµ with ±3.0 kHz de-

viation @ 1 kHz tone modulation.

Click the left mouse button on the "Tight Noise SQL

RSSI" button.

Click the left mouse button on the "Start" button. The

CE94 will get the alignment value of Tight Noise SQL

RSSI and display it in the alignment window.

Press the "OK" button on the window, the value of the

alignment for Tight Noise SQL RSSI (wide deviation)

will be saved in the radio.

Set the transceiver to CH 2 (band center, narrow de-

viation) via the "Channel" box on the "Alignment"

window.

Tune the RF output of the Radio Tester to 481.100 MHz,

then set the output level to +3 dBµ with ±1.5 kHz de-