1. RX VCO Tune Voltage
Set the transceiver to CH4 (high band edge) via the
"Channel" box on the "Alignment" window.
Click the left mouse button on the "RX VCV" button.
Click the left mouse button on the "Start" button.
Move the Slide Bar, as needed as, until the "VCV Level"
indicator displays a value in "165±3".
Press the "OK" button on the window, the value of the
alignment for RX VCO will be saved in the radio.
2. TX VCO Tune Voltage
Set the transceiver to CH4 (high band edge) via the
"Channel" box on the "Alignment" window.
Click the left mouse button on the "TX VCV" button.
Click the left mouse button on the "Start" button.
Move the Slide Bar, as needed as, until the "VCV Level"
indicator displays a value in "165±3".
Press the "OK" button on the window, the value of the
alignment for TX VCO will be saved in the radio.
Alignment
G-3