V.35-To-V.35 Configuration - Paradyne HotWire 7925 User Manual

V.35-to-V.35 Configuration

To connect two V.35-compatible units, configure the units as follows (factory
defaults are in bold):
7925-A2-GB20-30
PRELIMINARY DRAFT
Configuration V.35-Compatible Unit
Option (Customer Premises)
Card Type CP
Loops Enabled Dual (Loops A & B) or
Single (Loop A)
Payload Rate 1 – 9 (64 – 2048 Kbps).
If only Loop A is enabled,
rate can only go up to
1024 Kbps, option 8.
Transmit Timing Loop
June 1997
V.35-Compatible Unit
(Central Site)
CO
Must be same as CP side
Must be same as CP side
If clock is supplied by the CO's V.35
application equipment, use External,
else use Internal.
Worksheets
A-3