Entering Identity Information; Network Configuration - Paradyne Hotwire 7985 Installation Instructions Manual

Entering Identity Information

Network Configuration

4
Press Enter from your terminal or PC to activate the Main Menu for the attached
unit. The system runs diagnostics and status checks. After a few moments, the
Main Menu or Logon screen appears on your terminal.
After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Identity screen, follow this
menu selection sequence:
Main Menu Control
The following illustration shows a network application using a 2-port Hotwire 8786
or 8784 M/HDSL Termination Unit for access concentration in a central office
(CO). A frame relay switch and a router are connected, through the termination
unit, to partner units supporting a host or router, and frame relay encapsulated or
unframed data.
Frame
Relay
Switch
Router
Termination Unit
in 8600 DSLAM
CO Site
LTU
7985 (V.35)
7986 (G.703)
7984 (DSX)
March 1999
Change Identity
CO Site
8786 or 8784
EIA 530a
V.35
E1 Host
(Frame Relay
7985
Encapsulated
Data)
EIA 530a
V.35
Router
(Frame Relay
7985
Encapsulated
Data)
EIA 530a
V.35
Router
7985
Customer
Premises (CP)
Customer
Premises
NTU
V.35
7985-A2-GZ40-00
7985
98-16131