V.35-Compatible Units - Paradyne HotWire 7925 User Manual

V.35-Compatible Units

Use Figure C-2 to assist you in locating the switchpacks and jumpers on the
board.
The jumpers and switchpacks detailed in Figure C-2 are used to change
configuration options. All other jumpers (listed below) should always be left as
positioned at the factory.
7925-A2-GB20-30
PRELIMINARY DRAFT
Jumper Pins (Factory-Setting)
P1 2–3
P2 1–2
P4 2–3
P5 No Jumper
P9 2–3
P10 2–3
P11 1–2
June 1997
Switchpacks and Jumpers
C-3