Table of Contents
Advertisement
Using the HotWire Diagnostics Utility
Loopback Test Results
3-10
For the Options window operation, select the values to be used during the
test and/or click on:
— OK to accept the parameters and return to the Loopback window.
— Cancel to close the window without accepting any values and return to
the Loopback Test Options screen.
— Help to access screen help.
4. Click on one of the following:
— Start to start a test.
— Exit to close the window and return to the main menu without running a
test or after running a test and viewing results.
— Help to access screen help.
When the test completes, the Loopback window displays the summary of the
Loopback results, including the:
Values of the relevant counters for the number of requests (packets) sent.
Replies received and the success rate.
Average Round Trip (RT) delay distribution.
Reports on any errors found or packets dropped.
NOTE:
If you cannot run a successful local or remote loopback test, contact your
customer service representative.
April 1997
5100-A2-GB22-10
Advertisement
Table of Contents
