Advertisement
Quick Links
Advertisement
Related Manuals for WATSON Tonic Single Sided Fabric Infill Screen
Summary of Contents for WATSON Tonic Single Sided Fabric Infill Screen
- Page 1 ASSEMBLY Tonic Single Sided Fabric Infill Screen V.23.1 10/2023 360.394.1300 watsonfurniture.com...
- Page 2 SCREW (125030) (486915) SCREW (122810) (504611) Z-CLIP (0000158) Tonic Single Sided Fabric Infill Screen Components INFILL BASE FABRIC PANEL Tools Electric Drill P2 Phillips 5/16 Hex Drill/ Driver Bit Driver Bit 2 TONIC SINGLE SIDED FABRIC INFILL SCREEN ASSEMBLY INSTRUCTIONS...
- Page 3 Drive supplied z-clips on all predefined pilot holes with #8 x 3/4” screws (122810) as shown below. DO NOT USE THE 1” LONG SCREWS THAT ARE USED TO SECURE THE PRIMARY DESK SURFACES INFILL CLIP #8 X 3/4” WOOD (486915) SCREW (122810) Z-CLIP (0000158) 3 TONIC SINGLE SIDED FABRIC INFILL SCREEN ASSEMBLY INSTRUCTIONS...
- Page 4 For infills with multiple fabric panels, use the allignment plate (504611) between the two screens. Push the allignment plate (504611) into the slot in the fabric panels. 5/16-18 X 1.25” SCREW (125030) ALLIGNMENT PLATE (504611) 4 TONIC SINGLE SIDED FABRIC INFILL SCREEN ASSEMBLY INSTRUCTIONS...
Need help?
Do you have a question about the Tonic Single Sided Fabric Infill Screen and is the answer not in the manual?
Questions and answers