Related Manuals for WATSON Tonic Single Sided Cable Platform
Summary of Contents for WATSON Tonic Single Sided Cable Platform
- Page 1 ASSEMBLY Tonic Single Sided Cable Platform View Digitally V.25.0 1/2025 360.394.1300 watsonfurniture.com...
- Page 2 Hardware Alligator Clip #10 x 5/8” Screw 8-32 x 1” Screw (486911) (122800) (493815) Tonic Single Sided Cable Platform Components SINGLE-SIDED CABLE PLATFORM Tools Electric Drill P2 Phillips Driver Bit 2 TONIC SINGLE SIDED CABLE PLATFORM ASSEMBLY INSTRUCTIONS...
- Page 3 Attach alligator clips (486911) to cable platform with wood screws (122800). DO NOT USE THE 1” LONG SCREWS THAT ARE USED TO SECURE THE PRIMARY DESKSURFACES. Alligator Clip #10 x 5/8” Screw (486911) (122800) 3 TONIC SINGLE SIDED CABLE PLATFORM ASSEMBLY INSTRUCTIONS...
- Page 4 Attach with alligator clips on the underside to raceway rails with 3 screws (493815). Note: Alliagator clips can be used to route data cables on the underside of the raceway. There is a 3.75” gap between the cable platform and infill above. 4 TONIC SINGLE SIDED CABLE PLATFORM ASSEMBLY INSTRUCTIONS...
Need help?
Do you have a question about the Tonic Single Sided Cable Platform and is the answer not in the manual?
Questions and answers