Timer - Whirlpool IWHH9050CC Health & Safety, Use & Care, Installation Manual And Online Warranty Registration Information

Table of Contents

Advertisement

Using the Timer
When the cooktop is turned on, you can use the timer in two different ways:
•You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
•You can set it to turn either or more than one cooking zones off.
•You can set the minute minder/timer for up to 99 minutes.
Timer overview
Timer control
Using the Timer as a Minute Minder
Ensure the cooking zones are not selected
1.Touch the timer control button
indicator flashes.
2. You can adjust the minute minder single digit by sliding the scroll
keypad.
3.Touch the timer control button
minute minder tens digit by slider the scroll keypad.
•To confirm, press the timer control button.
Note: The minute minder works in the following sequence:
"Single Digit - Tens Digit". The timer can set up to 99 mins.
When the minute minder is set, it will begin to count down
immediately, the display will show the remaining time. The
red dot next to timer indicator will flash.
Buzzer will beep for 30 seconds and timer indicator shows "-
- "when the setting time finished. Any efficient touching of
control buttons during it, would end up the buzzer beeps.
, the number in the timer
again, you can adjust the
Timer up
18
Minute display
shows the number
of minutes

Advertisement

Table of Contents
loading

Table of Contents