Table of Contents
Advertisement
Connecting the cooktop to the mains power supply
The power supply should be connected in compliance with the relevant standard, or
a single-pole circuit breaker. The appliance has a large power rating and must be
connected to electricity by a Qualified Electrician.
Notes:
1. If the cable is damaged or needs replacement, this should be done by an after-
sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omni polar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been made
and that it complies with safety regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by qualified technician.
Cautions
1. The cooktop must be installed by qualified personnel or technicians. Please never
conduct the operation by yourself.
2. The induction cooktop shall not be mounted to cooling equipment, dishwashers and
rotary dryers.
3. The induction cooktop shall be installed such that better heat radiation can be
ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be heat resistant.
6. A steam cleaner is not to be used.
9
Advertisement
Table of Contents
