Table of Contents
Advertisement
88
On the
road
vehicle speed exceeds the set speed by about
3 mph (3 km/h). At the same time, a warning
symbol appears in the display. The symbol's
appeara nce m ight be different in some mod-
els.
The speed warning system has one or two*
warn ing thresholds that f unct ion independ -
ently of each other and that have somewhat
different purposes:
Speed warn ing 1
You can use speed warning 1 to set the maxi-
mum speed w hile you are driv ing. This setting
will remain in effect until you turn off the igni-
tion, assuming that you have not changed or
reset the setting.
The .
(USA models)/ .
(Canada models)
speed warning symbol in the warning 1 dis-
play appears whe n you exceed the maximum
speed. It goes out when the speed fa ll s below
the stored maximum speed.
The speed warning symbo l w ill also go out if
the speed
exceeds
the stored maximum speed
by more than about 25 mph (40 km/h) for at
least 10 seconds. The stored maximum speed
is deleted .
Sett ing speed warning 1
c::>
page 88.
Speed warning 2*
Storing warning 2 is recommended if you
al-
ways
want to be reminded of a certain speed,
for example when you are traveling in a coun-
try that has a general maximum speed li mit,
or if you do not want to exceed a specified
speed for winter tires.
The .
(USA mode ls)/ .
(Canada mode ls)
speed warning 2 symbo l appears in the dis-
play when you exceed the stored speed lim it.
Unlike warning 1, it will not go out until the
vehicle speed drops below the stored speed
lim it.
Sett ing speed warning 2
c::>
page 88.
(D
Tips
Even tho ugh your vehicle is equipped with
a speed warning system, you should st ill
watch the speedome ter to make sure you
are not dr iving faster than the speed limit .
Speed warning 1: setting a speed limit
Warning threshold 1 is set by the
ISETI
but -
ton.
Fig. 99 SET but ton in the instr ument cluste r
Storing the maximum speed
.. Drive at the desired maximum speed.
.,. Press t he
ISE T I
button in the instrument
panel disp lay
c::>
fig .
99 for 1 second.
Resetting the maximum speed
.. Drive the vehicle at a speed of at least
3 mph (5 km/h)
.. Press the
ISET I
button for more than 2 sec-
onds.
The .
(USA mode ls)/ .
(Canada mode ls)
speed warning symbo l w il l appear briefly in
the display when you release the
I SE TI
button
to indicate that the maximum speed has been
stored successfully.
The maximum speed remains stored until it is
changed by pressing the
ISET !
button again
briefly or until it is deleted by a lengthy push
on the button.
Speed warning 2: setting a speed limit
Appli es to vehicles: wi th tri p comp uter
The radio or MMI* control unit is used to set,
change or delete warning threshold 2.
.. Select:
!CAR !
function button > In st rument
cluster > Speed warning .
Or
Advertisement
Table of Contents
