Table of Contents
Advertisement
9. When the Chemcassette™ leader is installed, adjust the leader tape by verifying the optics
block should be placed between the two "ALIGN" marks on the tape leader. The alignment
is essential to adjust and verify the Optics module before gas monitoring.
10. When new Chemcassette™ is installed correctly, tap NEXT.
11. The Analyzer reads the RFID tag on the Chemcassette™ tape and shows the tape
information. Check the Chemcassette™ information and if no issue appears, tap NEXT.
VC4™
93
User Manual
Advertisement
Table of Contents
