Table of Contents
Advertisement
Software Rev. Examples (Major/Minor/VIP):
01/07/FFFF - Rev. 1.07
03/0C/FFFF - Rev. 3.12
03/0C/0066 - Rev. 3.12-102
04/12/017A - Rev 4.18-378
Get Unit Status - 0x31
This command requests the current condition or status of the slave. This command allows the
master to inquire about the general operating condition of the system.
Command packet to instrument:
Command Code (0x31) - 1 byte
Response packet from instrument:
Command Code (0x31) - 1 byte
VC4™ Date - 2 bytes
VC4™ Time - 2 bytes
General Status - 2 bytes
bit 0: Current Operating mode
0 = Not monitoring
1 = Monitoring
bit 1: Keyboard Lockout state
0 = Disabled
1 = Enabled
bit 2: Key pad status
0 = unlock
1 = locked
bit 3: Chemcassette™ counter status
0 = Counter disabled
1 = Counter enabled
bit 4: 2mA Fault operation
0 = Feature disabled
1 = Feature enabled
VC4™
139
User Manual
Advertisement
Table of Contents
