Table of Contents
Advertisement
Power-up mode
There are three options in power-up mode:
Power up in monitoring mode: Analyzer will start monitoring mode after it powers up.
l
Power up out of monitoring mode (default): Analyzer will stay at idle more after it powers up.
l
An operator manually starts monitoring mode.
Power up in last state: Analyzer remembers its last state and gets back to that state after it
l
powers up.
Select the point to configure and tap on
Activate the selected point and select the Target Gas. If you want to apply same configurations
to other points of the analyzer, tap on the APPLY TO OTHERS button.
Note: When making and saving a change to an item in the analyzer configuration, this also
changes all items in the points to the default.
Units
Select to display concentrations in milligrams per cubic meter. If this option is not selected,
VC4™ displays concentrations in parts-per-million (ppm) or parts-per-billion (ppb).
Select a target gas for the point and enter the gas location of the place where gas is sampled. A
Tag Name can be set for the point also.
VC4™
the EDIT button.
39
User Manual
Advertisement
Table of Contents
