Table of Contents
Advertisement
Operation
Cleanup
1.
Perform Pressure Relief Procedure,
page 9.
2.
Remove tip guard and Spray Tip. For
additional information, see separate gun
manual.
ti24592a
3.
Remove fluid intake and drain tube from
paint, wipe excess paint off outside.
18
4.
Place fluid intake in a flushing fluid. Use
water for water base paint and mineral
spirits for oil-based paint. Place drain
tube in a waste pail.
5.
Turn prime valve horizontal.
ti24709a
ti24710a
334649F
Advertisement
Table of Contents
