6.
Increase pressure 1/2 turn to start motor.
Hold gun against paint pail. Disengage
the trigger lock. Trigger gun and
increase pressure until the pump runs
steady and flushing fluid appears.
ti25287a
7.
Stop triggering gun. Move gun to waste
pail, hold gun against pail, trigger gun to
thoroughly flush system.
8.
While continuing to trigger gun, turn
prime valve down. Then, release gun
trigger. Allow flushing fluid to circulate
until fluid comes out of drain tube clear.
334649F
ti25317a
9.
Raise fluid intake above flushing fluid.
Operation
ti24713a
ti24714a
19