Table of Contents
Advertisement
7.
Hold gun against a grounded metal
waste pail. Trigger gun until paint
appears.
ti25201a
8.
Move gun to a paint pail and trigger for 20
seconds. Release trigger and allow
sprayer to build pressure. Engage the
trigger lock.
334649F
High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. Do not stop leaks with hand or rag.
9.
10. Screw tip assembly onto gun and
1 m
20 s
ti25202a
Startup/Prime
Inspect for leaks. If leaks occur, perform
Pressure Relief Procedure, page 9,
then tighten all fittings and repeat
Startup procedure. If there are no leaks
continue with the next step.
tighten. See Spray Tip Installation,
page 16. For gun assembly instructions,
see separate gun manual.
ti24652a
15
Advertisement
Table of Contents
