Table of Contents
Advertisement
Operation
10. Turn prime valve horizontal. Trigger gun
into flushing pail to purge fluid from hose.
11. Engage the trigger lock.
12. Turn pressure control knob to the lowest
pressure setting and turn ON/OFF
switch to OFF position. Disconnect
power to sprayer.
ti25282a
13. Remove filter from gun. Clean and
inspect. Install filter. See separate gun
manual.
20
ti25331a
14. If flushing with water, flush again with
mineral spirits or Pump Armor to leave a
protective coating to prevent freezing or
corrosion.
ti25319a
ti25295a
15. Wipe sprayer, hose and gun with a rag
soaked in water or mineral spirits.
ti24720a
334649F
Advertisement
Table of Contents
